- This topic has 6 replies, 7 voices, and was last updated 7 years, 10 months ago by .
Viewing 7 posts - 1 through 7 (of 7 total)
Viewing 7 posts - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
Home › Forums › Fantasy › General Fantasy › 15/18mm Pig Faced Orcs?
Anybody know a manufacturer of 15/18mm pig faced Orcs (similar to the 28mm Otherworld miniatures). My knowledge of fantasy manufacturers is very poor, and my google-fu seems to be failing me?
Thanks in advance
Those are brave men knocking at our door. Let's go kill them!
No idea, sorry.
/
Chief Sarcaster at http://www.exmouthwargames.org.uk/
Assistant Dogsbody at http://legionaryshow.co.uk/
/
Seems to be working fine for me.
Minifigs sell the classic 1970’s ones. They are 25mm and some of the moulds are rather worn, so some cleaning up required in places. Hope this helps?
The testing above is for me – I could not reply on the iPad though the Mac is fine
I’ve never found any pig faced orcs for 15mm and the Minifigs ones are too large to scale with even the 18mm fantasy / 20mm SL woodland folk figures I have. Even hunting on Shapeways has never given any 15s even close.
The best so far I have found are the Blood Dawn Orcs that have tusks:
These are from http://www.magistermilitum.com
It may be worth trying to get hold of http://www.shapeways.com/shops/timeportalgames and see if they can tweak and shrink their Orc figures down to 15s as they are closer than the Blood Dawn ones. Gut feel is this will cost a fair bit though…
I keep hoping Splintered Light or Khurasan would do some but I am not sure over the copyright position from the D&D books.
This is a good site for comparing miniatures, the link is for the Orc page. Judging by what’s available there maybe Jacobite might fit the bill?