Home › Forums › Modern › 3D model SAM Roland. Scale 1:100

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 03/04/2023 at 22:28 #184705
    Avatar photoФил Лохмин
    Participant

    Close to the final. Model test print

    04/04/2023 at 05:21 #184707
    Avatar photokyoteblue
    Participant

    Looks really good.

    04/04/2023 at 13:06 #184736
    Avatar photoФил Лохмин
    Participant

    Thank you! I was asked to make “beautiful”)))

    04/04/2023 at 13:07 #184737
    Avatar photoФил Лохмин
    Participant

    Now there is still a version of the Roland 2 air defense system based on the AMX-30. The guidance radar can be glued to the Roland 1 turret.

    06/04/2023 at 06:00 #184813
    Avatar photoФил Лохмин
    Participant

    Finished the 3d model of the Roland 1 and 2 air defense systems on a scale of 1:100

    The different options include the following details:
    1) SAM body with tracks and side screens with open and closed driver’s hatch.
    2) SAM body with simplified tracks with open and closed driver’s hatch.
    3) SAM body with open and closed driver’s hatch and caterpillars separately
    4) Towers with an open and closed hatch of the optical guidance system
    5) guides with rockets straight and the second option at an angle of 30 degrees
    6) Surveillance Radar
    7) Missile guidance radar (SAM Roland 2)
    8 ) The figure of the driver

    01/05/2023 at 22:28 #185749
    Avatar photoФил Лохмин
    Participant

    Many thanks to Daryl for the photos of the printed 3D models.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.