- 24/12/2016 at 22:20 #54477
At a bit of a loose end tonight, I started work on a plane to go with my cuties. Lots more work to do on it, but the general shape is there apart from the cockpit.24/12/2016 at 22:28 #54478MikeKeymaster24/12/2016 at 22:46 #54480
The figure is just for scale, a proper pilot figure will follow if I like the plane when it’s done. Flying helmet, goggles and silk scarf probably. 🙂
Correct, the half eggs that form the body of the plane are from Hobbycraft, the rest is cut from 2mm MDF. 🙂
I’m wondering if I could make a mould from it to cast in resin, to be filled through the tail? There won’t be any areas where the resin would have to flow uphill, so it might be a possibility. That would be the difference between one or two ground support aircraft or multi plane dogfights.24/12/2016 at 22:49 #54481
I love your creativity Vicki !!!! This look like fun !!!!25/12/2016 at 05:03 #54486Just JackParticipant
I’m in for the dogfights!!!
On a side note, you’re insane! 😉
Merry Christmas, Vicki! Hope you have a wonderful holiday.
Jack25/12/2016 at 05:10 #54487
Just Jack means that in a good way Vicki !!!!25/12/2016 at 13:42 #54506
I decided to make a bomber too and I’ve started adding Milliput to it and the fighter.
(And this is how I spend my Christmas Day lol)25/12/2016 at 16:50 #54509Rod RobertsonParticipant
Cool!25/12/2016 at 17:50 #54511
Wowzer !!!!26/12/2016 at 02:45 #54528PatGParticipant
That’s no bomber that’s a Beaufighter. 😉26/12/2016 at 23:06 #54554Deleted UserMember
Your planes are far from plain. Indeed, with this idea I think you’re taking off & reaching new heights.
Anyway, I should stop droning on…
donald31/12/2016 at 22:08 #54739
I made a pilot to go with my still not yet completed aircraft. 🙂31/12/2016 at 22:19 #54740
How cool is that !!! I admire your talent !!!02/01/2017 at 15:14 #5482902/01/2017 at 18:02 #54840
Wow I love it!!!03/01/2017 at 01:31 #54865Rod RobertsonParticipant
Too cool! I like it a lot! The pseudo Polish markings are grand.
Cheers and good gaming.
- You must be logged in to reply to this topic.