21/01/2019 at 20:40 #107956
I’ve started to get in fantasy mood after small scale sci-fi adventure. I think I am much interested with fantasy in winter time. I don’t know any of you have a cycle this way ? Since I can make MDF sihoulettes I don’t have a figure problem too. I’m based in Turkey and it’s hard to find and buy figures. But Flat figures not only about my budget, they are easy to paint and get into action. If you have some experience in figure painting I’m sure this will be much easy object to paint.
I’m also try to sell my products here. I will try to convince you my way is good 🙂
I’ve created laser cut MDF flat figures, laser cut MDF buildings and purchased a hot wire foam cutter then I’ve started to make foam bricks.
I will begin with foam bricks project.
this is Proxxon 230E thermocut. It’s still not fully constructed in this picture. But next picture show how it’s looks when assembled.
I’ve used XPS foam and made bricks. There are two types of foam as far as I know. Pink and blue. Generally pink is much stronger than the blue one. After you made the bricks you can squeeze them or put in a jar with some small stones and give them effects. I have not done the second option yet.
I’ve started to place them on a cardboard by using a PVA glue. Wait one night for drying.
In this picture you can see a squeezed aliminium foil. I used it to give effects. But be sure you’ve waited one night after building the walls or give effects before started making walls. You can also see my flat figures here I will show them later.
One night wall making, one night black coat and tonight I finally made the dry brushing.
I hope you enjoy.21/01/2019 at 20:54 #107957Angel BarracksModerator
I have ordered a sample pack from Ali and will pop them up in my main topic when they arrive.21/01/2019 at 21:40 #107958ian pillayParticipant
I’ve been following these developments on Facebook. Bloomin’ Fantastic. I really like the flats and the buildings.
Just need them to be 1/72 scale 😉
Tally-Ho!22/01/2019 at 20:01 #108014
Today rest of the ruins painted, still needs some flocking.
What can be hidden in this ruins? Maybe an underground passage ? Guarded by ?23/01/2019 at 17:15 #108069
I’m gonna take a small break to show you my foam terrain, instead of that I’m pleased to show you my two MDF laser cut buildings.
I’ve made design on AI(Adobe Illustrator) then exported the files for the laser cutter.
27/01/2019 at 23:48 #108293
- This reply was modified 2 years, 2 months ago by Ali Dogan Sayiner.
Back to foam project.28/01/2019 at 15:46 #108336Darkest Star GamesParticipant
You know, those MDF buildings aren’t bad at all. I really like the depth achieved with 2 layers, way ahead of most MDF buildings.
"I saw this in a cartoon once, but I'm pretty sure I can do it..."11/02/2019 at 21:21 #10894011/02/2019 at 21:22 #10894112/02/2019 at 08:20 #10895812/02/2019 at 17:13 #10899312/02/2019 at 19:14 #10899912/02/2019 at 19:26 #10900212/02/2019 at 19:35 #10900412/02/2019 at 19:51 #10900512/02/2019 at 20:37 #10900720/08/2019 at 19:09 #12031920/08/2019 at 22:52 #120324ThomastonParticipant
Wow, I’ve missed so much, rhese look great. Foam ruins and MDF buildings really look great. Painting onbthe waggon look really good too.
Tired is enough.
- You must be logged in to reply to this topic.