Home Forums General General What's on your painting desk/table/corner

Tagged: 

Viewing 40 posts - 321 through 360 (of 372 total)
  • Author
    Posts
  • #137342
    Gillies Sim
    Participant

    Hammurabi70 – was that asking me how I did the 6mm stuff? If so read below, if not ignore it and sorry for butting in!

    For these I based 3 figures on each 30×30 MDF square. Used PVA and sand for the texture and to hide the edges of the bases a little. The sand I had sieved to make sure it was as fine as possible. A very basic dark brown base coat and then lightened twice to drybrush highlights, the second being mostly white but enough brown to discolour it slightly. The grass is 1mm static grass (from Serious Play on Ebay) and I used two different colours, one after the other to create some differences in tone.

    6mm Brits

    6mm brits 2

    https://nottherivercottage.blogspot.com/

    #137391
    hammurabi70
    Participant

    Thanks; very useful.  I am never very happy with my 6mm basing so I always want to know how people have done good looking basing!

    #137419
    Angel Barracks
    Moderator

    Actually started on the cave.
    w00p.

    #137420
    Gillies Sim
    Participant

    Thanks; very useful. I am never very happy with my 6mm basing so I always want to know how people have done good looking basing!

    Thank you! The method is pretty simple but I think gives a decent finish.

     

    Nice Cave Mike!

    https://nottherivercottage.blogspot.com/

    #137435
    Tony S
    Participant

    For what it’s worth, Baccus sell finer sand and shorter static grass more suitable for 6mm figures.  I agree with Gillies; finer material and grass looks better with smaller scale figures, but I’m too lazy to actually sift my sand!  (And I suspect my wife might have words with me about the grit in her flour sifter) 

    https://www.baccus6mm.com/catalogue/Basesandbasingmaterials/BasingMaterials/

    (I quite the subtle touches of green and brown shading on the cave rock).

     

    #137644
    Mike
    Keymaster

    Nice Cave Mike!

    Thanks.

    (I quite the subtle touches of green and brown shading on the cave rock).

    Also thanks.

    All done!

    Onto the next..

    #138976
    Whirlwind
    Participant

    Just finishing off my contribution to Per Broden’s charity project:

    Plus some other bits and pieces, including some Team Yankee modern vehicles

    I am actually pretty much done now, not sure what I will tackle next…

     

     

    https://hereticalgaming.blogspot.co.uk/

    #138978
    Not Connard Sage
    Participant

    At the minute a 3D printer…

    "I go online sometimes, but everyone's spelling is really bad. It's... depressing."

    #138992
    Olaf Meys
    Participant
    #138993
    Albert of Winterpig
    Participant

    Epic scale Space Marines, 15mm SYW Prussians, 28mm Macedonian Pikemen and Thessalian Cavalry and 6mm GNW/WSS Dragoons for the Per Broden great charity paint project!

     

    Yes yes I have a butterfly brain, why do you ask?

     

    #139215
    Whirlwind
    Participant

    More 15mm Cold War/Twilight 2000 on the desk, including US infantry, female militia fighters and a few soft-skin vehicles

    https://hereticalgaming.blogspot.co.uk/

    #139300
    Thomaston
    Participant

    @Whirlwind
    I like the camo on these guys.

    Tired is enough.

    #139305
    fairoaks024
    Participant

    20mm ACW, 25mm warlord Celt dog handlers for ‘infamy,infamy’, 15mm Swedish cavalry for GNW, 2 28mm Thor models for superhero games, some GW converted chaos champions and a couple of Saga mounted leaders.

    #139311
    Whirlwind
    Participant

    Thanks very much Thomaston, I appreciate it – I’m not normally any good at doing stuff like that, I was really pleased how it turned out.

    https://hereticalgaming.blogspot.co.uk/

    #140310
    Mike
    Keymaster

    Trees!!

    #140312
    Thaddeus Blanchette
    Participant

    3mm fantasy. These are druids summoning a spirit army via human sacrifice. The spirit warriors’ green has since been further dulled down with a light grey drybrush.

    We get slapped around, but we have a good time!

    #140313
    Thaddeus Blanchette
    Participant

    3mm Elven mages, heroes and general.

    We get slapped around, but we have a good time!

    #140350
    Muerto
    Participant

    Brilliant mix of underbrush on those tree bases.

    Great banner on the elves! Freehand?

    Muerto workbench

    So, the genesis of a Gaslands gate from Pegasus Hobbies bits (5% finished), a 3D-printed toad (too small for use), some Wizard Eyes (95% finished), jetties (50% finished), Reaper bones (25% finished), Perry ACW converted to 2nd US sharpshooters (25% finished), Galsands terrain (25% finished), a stone wall made from left-over putty (never ending).  One of those things was on the to-do list written in January.

    I might finish those Wizard Eyes today.

    #140421
    Thaddeus Blanchette
    Participant

    Thanks, Muerto! The flag’s paint job is based around four Dom’s Decal American roundels in 1/700 scale. I WISH I could paint that small, that precisely. I stole the idea from Mathieu and Velvet Mark.

    We get slapped around, but we have a good time!

    #140427
    Don Glewwe
    Participant

    I got these ten days ago, so I’m guessing they don’t fit in the new ‘Postie’ thread?

    Some entrenchements (and figures) for 15mm WW2 stuff.  I’m reaming/filing the hole sizes to fit a (punched) 5/16″ figure base, hacking them up a bit to get more/mostly 2-man foxholes, and mounting them on .020″ styrene (garage sale sign stock).  I also cut some in half(ish) to get u-shapes that I can tuck in behind figs to show them as being dug in behind/along an existing linear feature (like the hedgerow shown)

    Next step is to go through the remainders of my figure stock to find volunteers to cut off at the waist…

    https://brawlfactory.net/

    #140613
    Kitfox
    Participant

    This is my attempt to be more organised and plan out my painting better!

    Death to all fanatics!

    #140614
    Mike
    Keymaster

    Crikey, a list!

    #140616
    Kitfox
    Participant

    Crikey, a list!

    I’ll never stick with it!

    Death to all fanatics!

    #140626
    Kitfox
    Participant

    Well, if nothing else I have at least achieved spears…112 of them!

    Death to all fanatics!

    #140752
    Whirlwind
    Participant

    An M113…

    And some modern US infantry to look after it:

    More details here

    https://hereticalgaming.blogspot.co.uk/

    #141610
    Whirlwind
    Participant

    Some 15mm Battlefront Cold War British, more here.

    https://hereticalgaming.blogspot.co.uk/

    #142543
    Mike
    Keymaster

    Some Xyston painted as Southern Ocean warriors.

     

    #142593
    kyoteblue
    Participant

    Glueing trees to steel washers for my forest. Still.

    #142596
    Geof Downton
    Participant

    Dinosaurs!

    Specifically Acheson Creations T. Rexes, (Bonaparte and Wellesley) to be followed by various 15mm dinos from Khurasan and QRF.

    All for a post Lost World steampunk Jurassic Park.

    One who puts on his armour should not boast like one who takes it off.
    Ahab, King of Israel; 1 Kings 20:11

    #142624
    gamegonegood
    Participant

    I have poor eyesight & shaking hand, so I will never be great at painting minis , but Im still doing it. Here is my WW2 project, the paint isnt finished yet

    #142634

    28mm Old Glory Mexican Revolution – Federales – 36 just completed as part of a larger commission. They are painted to an enhanced Wargames standard as a special offer for first large scale commission at a discounted price.

    Gun Dog Miniature Painting Services
    https://m.facebook.com/gundogminiatures/
    Sniffing out unpainted armies!

    #143006
    Angel Barracks
    Moderator

    I like those dinosaurs..

    I am starting Ship’s Crew and Cargo…

    #143008
    kyoteblue
    Participant

    The trees are based but not yet flocked. I’m slow.

    #143011

    Another 50 odd batch of Old Glory 28mm Mexican Revolution Federales completes.

    Gun Dog Miniature Painting Services
    https://m.facebook.com/gundogminiatures/
    Sniffing out unpainted armies!

    #144988
    Whirlwind
    Participant

    I particularly like the ship’s crew above.

    https://hereticalgaming.blogspot.co.uk/

    #144989
    Whirlwind
    Participant

    I have been painting 2d6 Wargaming’s Soviet tanks and infantry – very nice scuplts, I am really pleased with them.

    https://hereticalgaming.blogspot.co.uk/

    #144990
    ian pillay
    Participant

    Jacklex ACW is the project that I am painting my way through at the moment, however it is Orctober so I will have a break from the historicals and do at least one green skin this month.

    Tally-Ho!

    #145002
    Mike
    Keymaster

    I particularly like the ship’s crew above.

    Cheers, they are all done now:

    #145006
    Whirlwind
    Participant

    That is a really well-composed pic that – lovely!

    https://hereticalgaming.blogspot.co.uk/

    #145024
    kyoteblue
    Participant

    Still working on my forest other than that nothing hobby-wise.

Viewing 40 posts - 321 through 360 (of 372 total)
  • You must be logged in to reply to this topic.