» Fil Lo's Replies

Fil Lo

Forum Replies Created

Viewing 21 posts - 1 through 21 (of 21 total)

Author

Posts
25/12/2019 at 10:48 in reply to: 15mm miniatures in progress #128545

Fil Lo
Participant

The second test print revealed a few more errors.
It is necessary to increase the thickness of the gun (the tip of the gun broke off) as well as to alter the method of attaching the gun to the turret. We need to increase the thickness of the machine gun on the commander’s turret.
On photo model from black PLA (had to for greater clarity inflict tier gray primer) tier 100 micron

20/12/2019 at 05:41 in reply to: 15mm miniatures in progress #128326

Fil Lo
Participant

Sure – for a couple of days. Small queue-FV721 now printed

23/11/2019 at 08:26 in reply to: Battlegroup Northag – 500 Point Escalation #127008

Fil Lo
Participant

Beautiful! What miniatures of armored vehicles do you use?

05/11/2019 at 09:51 in reply to: FV433 Abbot in 15mm (1:100) scale #125923

Fil Lo
Participant

03/11/2019 at 17:58 in reply to: FV433 Abbot in 15mm (1:100) scale #125805

Fil Lo
Participant

In addition, in the near future there will be a redesign of miniatures from the scale of 1: 100 to the scale of 1: 150

03/11/2019 at 17:56 in reply to: FV433 Abbot in 15mm (1:100) scale #125804

Fil Lo
Participant

Ah this not my whim – who the plays in Team Yankee, whom the need a model for other rules. The main thing is that the 3D model was and if desired, it can be printed. Although-for TY I need at least four pieces

15/10/2019 at 17:05 in reply to: 3D model Spähpanzer Luchs #124523

Fil Lo
Participant

Thanks for the flattering assessment!

I try to make the details somewhat “enlarged” – this allows me to print my models on inexpensive 3D printers. well, or slightly reduce the scale of the model

14/10/2019 at 20:48 in reply to: 3D model Spähpanzer Luchs #124464

Fil Lo
Participant

Printed by Kevin Boogaart. scale 1-160

14/10/2019 at 12:22 in reply to: 3D model Spähpanzer Luchs #124416

Fil Lo
Participant

Finished!

13/10/2019 at 19:01 in reply to: 3D model Spähpanzer Luchs #124385

Fil Lo
Participant

Test Print Spähpanzer Luchs. Scale 1-100. Layer 0.07 Plastic PLA.

There are a couple of points that need to be fixed for better printing on an FDM 3D printer

05/09/2019 at 16:23 in reply to: 3d model FV721 Fox (15mm scale) progress #121393

Fil Lo
Participant

If something is here:

https://www.wargaming3d.com/vendor/loxfil/

01/09/2019 at 18:46 in reply to: 3d model FV721 Fox (15mm scale) progress #121103

Fil Lo
Participant

a few photos of the model fv721 fox from one of the buyers

13/08/2019 at 16:34 in reply to: 3d model FV721 Fox (15mm scale) progress #119842

Fil Lo
Participant

Damn nice to hear that!

I try to make models so that they can be printed on low-priced FDM 3D printers (not everyone has DLP or SLA printers yet)

13/08/2019 at 09:11 in reply to: 3d model FV721 Fox (15mm scale) progress #119798

Fil Lo
Participant

During the day, the FV721 Fox will appear in wargaming3d.com

06/08/2019 at 16:34 in reply to: 3d model FV721 Fox (15mm scale) progress #119429

Fil Lo
Participant

30/07/2019 at 06:11 in reply to: BMD-1, BMD-1P, BMD-2 3D models in 15mm scale #118829

Fil Lo
Participant

Models on a photo only from the 3D printer. From post-processing, only supports removal. I try to make it so that my models can be printed on inexpensive printers. And yes – these models are printed on the printer cost up to $ 300.

29/07/2019 at 23:26 in reply to: BMD-1, BMD-1P, BMD-2 3D models in 15mm scale #118820

Fil Lo
Participant

In the work – the BTR-D and the self-propelled gun Nona. 3D models can be purchased here

https://www.wargaming3d.com/vendor/loxfil/

29/07/2019 at 21:30 in reply to: FV601 Saladin in 15mm (1:100) scale #118806

Fil Lo
Participant

3D modeling is a hobby. If you take time only for modeling – from two to four days. But sometimes I can’t force myself to draw – now it’s already the second week I’m drawing FV 721 Fox

29/07/2019 at 21:25 in reply to: Family CVR (T) set one (FV103 Spartan, FV120 Spartan MCT, FV102 Striker) #118803

Fil Lo
Participant

Yes – the hatch in two versions, and also instead of it you can install the launcher of anti-tank missiles (the second photo from the top)

29/07/2019 at 20:43 in reply to: FV601 Saladin in 15mm (1:100) scale #118798

Fil Lo
Participant

I am not going to cast my models from resin or metal. Prefer 3d printing. I sell the files. BUT my models are going to pour out of resin. Approximate dates – the end of autumn. At least – the person who bought the rights to commercial use of my models told me

29/07/2019 at 17:01 in reply to: FV601 Saladin in 15mm (1:100) scale #118783

Fil Lo
Participant

This is a test print of one of my 3d models. Printed on FDM 3D printer, material PLA, layer height 90 microns
Author

Posts

Viewing 21 posts - 1 through 21 (of 21 total)