Home › Forums › Modern › BMD-1, BMD-1P, BMD-2 3D models in 15mm scale

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 29/07/2019 at 17:07 #118784
    Avatar photoFil Lo
    Participant

    BMD-1, BMD-1P, BMD-2 3D models in 15mm scale

    29/07/2019 at 22:09 #118812
    Avatar photoThorsten Frank
    Participant

    I want to to a VDV battalion now….

    "In strange grammar this one writes" - Master Yoda

    29/07/2019 at 23:26 #118820
    Avatar photoFil Lo
    Participant

    In the work – the BTR-D and the self-propelled gun Nona. 3D models can be purchased here

    https://www.wargaming3d.com/vendor/loxfil/

    30/07/2019 at 00:25 #118821
    Avatar photomadman
    Participant

    All your work is really good. The actual printed models not just the 3D images. I know very little of 3D printing but are the models as printed (high resolution or excellent printers or both) or have they been cleaned up after printing. I ask because the details are great and the surfaces so clean. Thank you.

    30/07/2019 at 06:11 #118829
    Avatar photoFil Lo
    Participant

    Models on a photo only from the 3D printer. From post-processing, only supports removal. I try to make it so that my models can be printed on inexpensive printers. And yes – these models are printed on the printer cost up to $ 300.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.