We are pleased to announce the release of our New River System.
The rivers are available in three widths, The width of the water is 20mm, 50mm and 100mm with a standard sized river bank that is the same across the range.
Each river section features a 30º bend. By placing these in alternate directions enable the river to wind its way across the table in a natural realistic manner, while placing more than one and the same direction gives you a river bend. You don't need straight and bend sections, saving on cost and storage space.
The river sections come in sets of six with each section covering 300mm of table. Also available are junction sets. These come in sets of two. Three sets for each of the river widths and three sets with a narrower tributary fork of one of the narrower river sections, one left and one right.
The rivers are available in a standard black or light brown and come in our flexible after cure resin, so they will hug the table.
3 thoughts on “NEW River System Released”
04/12/2023 at 09:57
oooh is this made from the same stuff as your early roads when they first came out and your village bases?
How wide are the banks, 10mm?
06/12/2023 at 18:31
Yes, they are made from the flexible after cure resin, so it flexes like latex, but latex has a short lifespan, our flexible resin has the same lifespan as hard resin. We are using roads in our games that are now nearly twenty years old and still the same as the day we painted them.
The river bank is 25mm wide. This way it has a shallow slope back onto the table.
06/12/2023 at 18:41
Cool, I have some roads from when they first came out.
I will get me some of the rivers. 😀